Vikani Wall Guard Putty


Vikani Wall Guard Putty


Vikani Wall Guard Putty is specially formulated by white cement base, which made of filters and additives. Its specially formulated and stringent quality parameters to ensure the product features as superior white, water resistance and crack free surface for easy application along with higher coverage. It’s recommended to application for both interior and exterior finishes on any type of sand cement plaster and also direct on concrete background for getting smooth, silky and granite finish. Vikani Wall Guard Putty Packing available in size 2 kg, 20 kg.

 

Features

  • Easy application and sanding.
  • More Coverage hence economical.
  • Vikani Wall Guard Putty protect from moisture and water impacts.
  • It is painter’s friendly product so can painting application is easy.
  • Provide smooth, silky and super white finish.


Technical Specification


 

Parameter Vikani Wall Guard Putty
Setting Time (Min) 120-180
Density kg/m3 1800
Tensile Strength (N/mm2) 1.00
Compressive Strength (N/mm2) 9
Coverage per m2 (kg/mm) 1.85
Ingredients White Cement + Calcium Carbonate + Additive
Background Cement Plaster/RCC
Water Demand (Putty:Water) 3:1
Shrinkage Cracks No
Self Life 6 Months from the date of manufacturing
Manufacturing In House

Vikani Wall Guard Putty (Step 01)

Vikani Wall Guard Putty (Step 01)
Clean the wall surface with wire brush, sand paper or blade to remove all loose particles.


Vikani Wall Guard Putty (Step 02)

Vikani Wall Guard Putty (Step 02)
Prewet/dampen the wall with water.


Vikani Wall Guard Putty (Step 03)

Vikani Wall Guard Putty (Step 03)
Mix Vikani Wall Guard Putty to water (& not viceversa in a ratio of 3:1 & stir thoroughly to make a thick paste.


Vikani Wall Guard Putty (Step 04)

Vikani Wall Guard Putty (Step 04)
Apply first coat starting from bottom upwards with a putty blade.


Vikani Wall Guard Putty (Step 05)

Vikani Wall Guard Putty (Step 05)
Wait for 3 to 4 hours or complete drying.


Vikani Wall Guard Putty (Step 06)

Vikani Wall Guard Putty (Step 06)
Sand the surface with fine emery paper (320Grit and above) to remove blade scratch marks, if any.


Vikani Wall Guard Putty (Step 07)

Vikani Wall Guard Putty (Step 07)
Apply 2nd coat of putty with the blade.


Vikani Wall Guard Putty (Step 08)

Vikani Wall Guard Putty (Step 08)
Wait for 3 to 4 hours or complete drying of surface. Apply paint after the putty surface is smooth and without scratch marks.